Skip over generic navigation
Skip over primary navigation
Skip over visual
Sandwich components made from fiber-reinforced plastic face sheets and a ROHACELL® foam core allow substantial weight savings over metal components. The production process is fast and cost-effective.
Skip over functional column
Weight saving options in automotive construction are far from exhausted: While metal still holds sway in automotive design, plastics are now offering cost-effective solutions in small- or medium-scale production, even for large-area parts such as exterior paneling, interior trim, and concealed bases/supports. The use of sandwich design also allows substantial weight savings of up to 60 percent. In this type of structure, face sheets of fiber-reinforced resins or thermoplastics are applied on a light but high-strength core. High-performance ROHACELL® foam from Evonik is distinguished in this application by its high strength coupled with low weight and very high heat resistance. In cycle times of about two minutes, the foam core is thermally formed into the geometry required for the component, and is then quickly and very economically processed with, for example, high-performance resins at temperatures well above 130°C and high pressure. In combination with fiber reinforced thermoplastic face sheets, ROHACELL® also offers another extremely cost-effective method for production of panels, with the finished part available in less than four minutes. The foam core is heated along with the thermoplastic face sheets and formed, and in the same operation the two are bonded together, cooled, and removed from the die.